877-847-6236
877-637-3259
fax
877-847-6236
877-637-3259 fax

Tuff Stuff! Scratch Resistant Plate Finisher

Tuff Stuff! Scratch Resistant Plate Finisher - 5 gallons

Description

This proven Scratch Resistant Plate Finisher will eliminate scratches and fingerprints due to handling, stacking, auto loaders, clamping, bending, punching and other scratch causing events. This finisher can be used with any metal plate and protects from oxidation for up to two weeks in proper storage environment. With powerful biocides which prevent mold, algae and other growth, it will not gum up the plate processor.

Dosing & Directions

This product is ready to use and should not be diluted.

Clean and rinse your existing plate processor with warm water. Add Tuff Stuff Scratch Resistant Plate Finisher to the processor and just verify that plates are coming out with a thin even layer and that the plates are completely dry upon exit.

When applied properly the life expectancy is 1500 square feet per gallon.

Benefits

Elimination of handling scratches and finger prints
Releases immediately on press resulting in very fast make readies.
Will not sludge or build up in processor, greatly reduces processor maintenance time.
Outlasts competitive products by at least 50%.
Will not build up in press recirculating tanks.

Available in 2 x 2.5-gallons, 5-gallons and 55-gallon drums.

Related Products

Metal Plate Finisher - 5 gallons

Metal Plate Finisher

Proven universal plate finisher protects all aluminum printing plates from oxidation for up to one week. Prevents mold growth and will not gum up the processor. “Plate Prep” additive conditions the aluminum non-image area and reduces the roll-up time on the press by up to 30%! Available ready-to-use or as a 1-to-4 concentrate.

Comes in one and five gallons.

Tuff Stuff! Scratch Resistant Plate Finisher - 5 gallons

Tuff Stuff! Scratch Resistant Plate Finisher

Premium scratch resistant plate finisher eliminates scratches and fingerprints due to handling, stacking, auto loaders, clamping, bending, punching and other issues. Protects all aluminum printing plates from oxidation for up to two weeks. A powerful biocide prevents mold, algae and other growth, and it will not gum up the processor. “Plate Prep” additive conditions the aluminum non-image area and reduces the roll up time on press by up to 40%. It’s a fully synthetic product that will never cause gum blinding. It contains no-VOC‘s, is non-hazardous and is biodegradable.

Available in one and five gallons.

Pre-Bake Solution and Finisher

Pre-Bake Solution and Finisher

Universal prebake solution and finisher for the baking of metal plates. Also available in a 1-to-4 concentrate.

Available in one and five gallons.